SM6 — Single-Sided Cantilever Rack Starter Kit (6')

Already have this starter unit? View the matching AM6 Single-Sided Cantilever Rack Add-On Kit →

The SM6 is a Series 1000 Medium Duty cantilever rack starter kit designed for maintenance departments, tool rooms, and light industrial facilities that need to get long materials off the floor and organized quickly. At 6' tall with 12" arms and 6 storage positions, it's the most compact option in the MECO Series 1000 lineup — ideal when ceiling height is limited or the stored materials are shorter in length.

Ships complete with 2 uprights, 6 straight arms, and a brace set — everything needed to assemble your first bay with no additional components. Arms adjust on 3" centers the full height of the upright.

What's Included

• 2 uprights (6' height, 33" base length)
• 6 straight arms (12" length, 1,000 lb capacity each)
• 1 brace set (47" length)
• All hardware for assembly

Why the SM6

Ready to assemble, no guesswork — All components are pre-matched from MECO Omaha's Series 1000 system. No sourcing individual parts or verifying compatibility before ordering.

Highest arm capacity in the Series 1000 — At 1,000 lb per arm, the SM6 has the strongest arms in the medium duty lineup — ideal for dense, compact loads like tool storage, short bar stock, and bundled pipe.

Grows with your operation — Add AM6 add-on units at any time to extend into a continuous row system using shared upright frames, eliminating redundant uprights and maximizing floor space.

Forklift accessible — Open base design allows loading and unloading directly from the aisle. The base functions as an additional storage level and does not count against the rated upright capacity.

Not sure which rack you need? Read our cantilever rack buying guide for help with arm length, capacity, upright spacing and height.

Questions before ordering? Call (929) 577-4339 or email support@mywarehouseworld.com.

Floor Anchors (Required, Not Included): Uprights must be anchored to the floor before use. MECO recommends a minimum of 2 anchors per base — 1 in the front and 1 in the back on opposite sides of the base. Each base has holes for up to 4 anchors. Recommended anchor spec: ½" × 4¼". Anchors are not sold by MECO and must be sourced independently. Building codes vary by location — consult local codes for specific requirements.

Series 1000 Single-Sided Starter Units — Model Comparison

Arm capacity is set by arm length. Upright capacity is lower on taller uprights and with longer arms, so check the upright rating for the height and arm length you choose. All capacities are per MECO Omaha specifications based on evenly distributed loads.

Need double-sided storage? See the SMD6, SMD8, and SMD10 double-sided starter units.

Specifications

Important: Capacities are based on evenly distributed loads. Arms must never be placed on the back side of a single-sided upright. Unit must be anchored to the floor per assembly instructions.

Customization Options

Arm Lips (L Suffix)

Bolt-on 2" arm lips are available for all 12 MECO cantilever rack SKUs in this lineup, including this model. Lips extend 2" above the arm surface and are used to retain cylindrical loads — pipe, tubing, round bar — that may otherwise roll off the end of the arm.

• Applies to both arms and bases — lips bolt on to every arm and base in the unit
• No extra charge if ordered with the rack — add the "L" suffix to the model number at time of purchase (e.g. SM6 → SM6L) and lips are included at the same price
• Can be ordered separately later — lips can be field-installed at any time after purchase, though a separate order and charge will apply
• Non-structural — lips are a retention feature only and are not intended to bear any portion of the load
• Factory punched — all MECO arms are factory punched to accept bolt-on lips, so no drilling is required

To order with lips, contact us at support@mywarehouseworld.com or (929) 577-4339 and we will place the order with the L suffix at no additional cost.

Additional Customization Options

Contact us to discuss any of the following configurations:

Inclined Arms — For cylindrical loads that tend to roll, inclined arms pitch at 20° (approximately 4.36" per foot) to keep material secure on the rack.

Bolt-On Pipe Sockets — Field-installable pipe sockets (1⅜" inside diameter) provide an additional stop at the end of the arm for round stock and tubing.

Drop-In Deck Support Saddles — Convert the SM6 to a decked system for storing boxes, cartons, or furniture. Pre-engineered to accommodate 2×4 cross supports.

Custom Colors — Available at additional cost.

To discuss customization options, call (929) 577-4339 or email support@mywarehouseworld.com.

Shipping & Returns

Shipping Policy

This product ships as industrial freight via motor carrier from Omaha, NE. Need liftgate delivery? Tell us when you request your freight quote and we'll add it.

Freight is calculated based on your location and order size. Contact us before ordering for a freight quote specific to your facility.

Estimated lead times based on total order value:

Lead times are based on total order value and may vary. Contact us to confirm timing before ordering. If you have a delivery deadline or need to hold shipment until your facility is ready, we can coordinate directly with the supplier.

Freight quotes are subject to change without notice. Tracking provided via email once your order ships.

Return Policy

To initiate a return, contact us at support@mywarehouseworld.com or (929) 577-4339 within 30 days of delivery.