MECO Medium Duty Self-Dumping Hopper — 1/4 Cu. Yd. | SDHM025

MECO Omaha SDHM025 Medium Duty Self-Dumping Hopper — 1/4 Cu. Yd., 2,000 lb Capacity

Who it's for: Warehouses, distribution centers, plants and shops that move lighter material by forklift, such as recyclables, wood and metal chips and in-process materials, and want to dump it without handling the material by hand. The SDHM025 is a 1/4 cubic yard medium duty hopper rated for 2,000 lb.

Best for: lighter loads up to 2,000 lb at the lowest cost of the three MECO duty ratings, wet or dry materials, and one-person dumping from a forklift. Footprint: 29" wide × 49½" long.
Not the best fit for: heavy, dense scrap or castings, where the Heavy Duty SDHH (10 ga., up to 4,000 lb) or Extra Heavy Duty SDHX (7 ga., up to 6,000 lb) series is the better choice. For a different size, see all MECO self-dumping hoppers from 1/4 to 5 cubic yards.

The MECO SDHM025 is a medium duty self-dumping hopper with a 1/4 cubic yard capacity and a 2,000 lb load capacity. Built from 12 gauge steel with a 7 gauge base, it's designed for handling heavy, bulky scrap, in-process materials, castings, wood and metal chips, recyclables, and sludge in demanding industrial environments.

Hoppers are designed for forklift handling and tip forward automatically at the correct fork height for complete discharge of contents, then return to the upright position. A positive locking latch prevents accidental dumping. Ships fully assembled in high-visibility orange enamel finish. Available in orange or gray enamel (add suffix "–G" to model number for gray finish).

Key Features

• 2,000 lb load capacity — Medium Duty construction for the most demanding applications
• 1/4 cubic yard capacity — overall dimensions: W 29" × L 49½" × H 26"
• 12 gauge steel body / 7 gauge base — welded watertight construction prevents leakage for wet or dry use
• Positive locking latch — prevents accidental dumping; easy-to-use mechanism
• 2" formed top lips — increase rigidity and eliminate sharp edges
• Safety chain — secures hopper to handling vehicle during transport
• Eight precision-aligned rocker lugs per side — ensure smooth, consistent tipping operation
• Extra-deep fork openings — H 2½" × W 18½" — accommodate standard forklifts
• Interlocking stacking guides — Stackable up to 3 high (empty units only, same size, not when loaded).
• Ships fully assembled — ready to use immediately upon delivery
• Made in USA — manufactured by MECO Omaha
• Available in orange or gray enamel — both standard colors at the same price

Self-Dumping Hopper Duty Ratings

MECO offers three duty ratings to match your application and budget:

• Extra Heavy Duty (SDHX) — 7 ga. steel / 7 ga. base — up to 6,000 lb capacity — for the most demanding environments
• Heavy Duty (SDHH) — 10 ga. steel / 7 ga. base — up to 4,000 lb capacity — for high-volume industrial use
• Medium Duty (SDHM) — 12 ga. steel / 7 ga. base — up to 2,000 lb capacity — for lighter applications

Not sure which hopper you need? Read our self-dumping hopper buying guide for help with size, duty rating, casters and forklift fit.

Specifications

FAQ

How does a MECO self-dumping hopper work?

You pick the hopper up with a forklift using the fork openings and secure it with the included safety chain. At the dump location, release the positive locking latch. The hopper tips forward to empty its contents, then returns to the upright position.

How much can the SDHM025 hold?

It holds 1/4 cubic yard of material, with a load capacity of 2,000 lb per MECO Omaha's rating.

Will it fit my forklift?

The SDHM025 has fork openings 2½" high and 18½" wide. Check that your forks fit those openings and that your forklift's rated capacity covers the hopper's 298 lb weight plus your load.

Can it hold wet material?

Yes. The hopper is welded watertight, so it works for wet or dry material.

Does it come assembled?

Yes. The SDHM025 ships fully assembled and is ready to use on delivery.

Can the hoppers be stacked?

Yes. Empty hoppers can be stacked up to 3 high with hoppers of the same or similar size. Do not stack loaded hoppers. Hoppers with lids are not stackable.

Can I add casters or a lid?

Yes. MECO caster kits fit hoppers through 2½ cubic yards, including this one. Choose from mold-on rubber, steel, phenolic or polyurethane wheels in our hopper caster kits collection, and match the set capacity to your loaded weight. Hinged lids are also available but must be factory installed, so contact us before you order if you need one.

What is the difference between Medium, Heavy and Extra Heavy Duty hoppers?

Medium Duty (SDHM) uses 12 gauge steel and holds up to 2,000 lb. Heavy Duty (SDHH) uses 10 gauge steel and holds up to 4,000 lb. Extra Heavy Duty (SDHX) uses 7 gauge steel and holds up to 6,000 lb. All three use a 7 gauge base. Capacity can be lower on the largest sizes, so check the rating for the size you choose.

What colors are available?

Orange enamel (SDHM025) or gray enamel (SDHM025-G), both at the same price. Select the color at the top of this page.

How is the SDHM025 delivered?

It ships fully assembled by freight truck from MECO Omaha in Omaha, NE, as curbside delivery. The hopper weighs about 298 lb, so have a forklift ready to unload, or ask us to add liftgate delivery to your freight quote. You can also use your own freight carrier at no extra cost.

Is My Warehouse World an authorized MECO Omaha dealer?

Yes. We're an authorized dealer for MECO Omaha, and every order is placed directly with MECO and ships from their facility.

Customization & Accessories

Compatible Caster Kits

Add mobility to your hopper with a set of 4 casters. The following kits are compatible with this hopper based on its 2,000 lb capacity:

• Mold-On Rubber Caster Kit — compatible SKUs: CK625VR, CK820VR, CK825VR
• Steel Caster Kit — compatible SKUs: CK620SS, CK625SS, CK820SS, CK825SS
• Phenolic Caster Kit — compatible SKUs: CK620PH, CK625PH, CK820PH, CK825PH
• Polyurethane Caster Kit — compatible SKUs: CK620PU, CK625PU, CK820PU, CK825PU

Hinged Lids

Hinged lids are available for all MECO self-dumping hoppers and must be factory installed — contact us before ordering if you need a lid. Note that hoppers with lids are not stackable, and the addition of a lid may alter the tipping operation. Available in orange or gray enamel. Contact us at support@mywarehouseworld.com or (929) 577-4339 for pricing.

Color Options

Available in high-visibility orange enamel (standard) or gray enamel at no additional charge. To order gray, select the Gray variant on this page.

Shipping & Returns

Delivery, Lead Time & Warranty

Shipping Policy

This hopper ships fully assembled via freight from MECO Omaha's facility in Omaha, NE (FOB Omaha, NE). Need liftgate delivery? Tell us when you request your freight quote and we'll add it.

Estimated lead times based on total order value:

Residential and rural delivery surcharges may apply. Freight cost is calculated at checkout based on your delivery location.

Return Policy

To initiate a return, contact us at support@mywarehouseworld.com or (929) 577-4339 within 30 days of delivery.